Tekmar 079 Slab Sensor Uživatelský manuál stáhnout pdf

D 079

Installation - Slab Sensor 079

STEP ONE

INSTALLING THE SENSOR

New Installations

Thin-Set or Thin-Pour Applications

If the floor covering is to be installed over either

a thin-set or thin-pour material of sufficient

depth, the 079 slab sensor can be placed

directly into either the thin-set material or the

thin-pour material and covered over. Ensure

that the sensor is located in such a position that

the attached wire is able to reach to a suitable

junction location. Splices within the thin-set or

(45 mm) long should be cut to accommodate the sensor. The sensor should be located

mid way between the heating elements to ensure a proper temperature reading.

Tiles

Thin-set

Electric

Cables

thin-pour should be avoided to ensure trouble free operation. The sensor should be located

mid way between the heating elements to ensure a proper temperature reading.

Thin Floor Coverings (less

than 3/8” (10 mm))

If a thin floor covering is to be installed directly

to the subfloor, a groove 1/8” (4 mm) wide by

1/16” (2 mm) deep can be cut into the surface of

the subfloor to accommodate the wire for the

sensor. Ensure that the sensor is located in

such a position that the attached wire is able

to reach to a suitable junction location. Splices

under the floor covering should be avoided to

ensure trouble free operation. A groove 3/16”

(5 mm) wide by 3/16” (5 mm) deep by 1-3/4”

Hardwood

Subfloor

SLAB SENSOR 079

The tekmar Slab Sensor 079 has a stainless steel sleeve which is designed for use in

concrete, thin-set or grout. The 079 is supplied with 10’ (3 m) of 2 conductor zipcord.

Hardwood

Subfloor

Thick Floor Coverings (great-

er than 3/8” (10 mm))

If a thick floor covering is to be installed directly

to the subfloor, a groove 1/8” (4 mm) wide by

1/16” (2 mm) deep can be cut into the back

of the flooring material to accommodate the

wire for the sensor. Ensure that the sensor is

located in such a position that the attached wire

is able to reach to a suitable junction location.

1 2 3 4

Shrnutí obsahu

Strany 1

Strany 2 - Subfloor

Strany 3

Strany 4 - Technical Data

All specifications are subjectto change without notice4 of 4 D 079 - 05/07.tekmar Control Systems Ltd., Canadatekmar Control Systems, Inc., U.S.A.Head

Komentáře k této Příručce

Žádné komentáře

Tekmar 079 Slab Sensor Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Senzory Tekmar 079 Slab Sensor. tekmar 079 Slab Sensor User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Senzory Tekmar 079 Slab Sensor